TM 9-2350-222-20-1-5
INTERIOR RELEASE MECHANISM CONTROL ASSEMBLY REPLACEMENT (Sheet 2 of 5)
NOTE
On early model perform steps
1 and 2 and continue with
step 3. On late model start
with step 2.1.
Using screwdriver, remove screws (A)
securing clamps (B).
Remove clamps (B).
Using 7/64 inch allen wrench, loosen four
screws (A) securing clamps(B) to cables (C).
Remove cables (C) from clamps (B).
3.
Using two 9/16 inch wrenches, remove nut (C.1)
securing control housing (D) to bracket (E).
4.
Remove control housing (D) from bracket (E).
Using 9/16 inch and 5/16 inch wrenches,
remove nut (F) from control housing (D).
NOTE
Bracket (E) rotated 900 to show installation of nuts (C) and (F)
and control housing (D).
TA253892