TM 9-2350-222-20-1-5
CHAIN STOWAGE HANDLE REPLACEMENT (Sheet 1 of 1)
TOOLS: Sledge hammer
1 lb. ball peen hammer
1/8 in. diameter drive pin punch
Slip joint pliers
SUPPLIES: Spring pin (MS171594) (2 required)
REMOVAL:
1.
Using hammer and punch, drive out pin (A).
NOTE
It may be necessary to use sledge
hammer to remove handles (B) and
(C).
2.
Screw handle (B) or (C) off studs.
3.
Remove clamp (D) or (E).
INSTALLATION:
1.
Position clamp (D) or (E).
2.
Install handle (B) or (C) onto studs.
3.
Screw handle (B) or (C) down on studs to expose spring pin mounting hole.
4.
Using pliers, install spring pin (A).
5.
Using hammer, position pin (A) to stick out evenly on both sides of stud.
End of Task
TA139207
