TM 9-2350-222-20-1-5
REAR DRAIN VALVE ASSEMBLY REPLACEMENT (Sheet 5 of 6)
INSTALLATION:
1.
Assemble knob (A), ferrule (B), spring (C), and
valve (D) on valve seat (E).
NOTE
Use block of wood to support
valve (D) in the closed position.
With second person pressing down on ferrule
2.
(B) with two screwdrivers, uee punch to line up
hole in knob (A) and hole in valve (D).
Using pliers, start pin (F) in hole in knob (A).
3.
4.
Using hammer and punch, drive pin (F) all the
way in hole.
TA140785
