TM 9-2350-222-20-1-5
ENGINE ACCESS PANEL SEAL REPLACEMENT (Sheet 2 of 3)
3.
Using 7/16 inch socket, remove seven screws
(G), washers (H), and flat washers (J) securing
small seal (K) to support (L).
4.
Remove support (L) and small seal (K).
5.
Using 7/16 inch socket, remove 21 screws (M),
washers (N), and seven straps (P) securing large
seal (Q) to top deck (F).
6.
Remove large seal (Q).
INSTALLATION:
1.
Place large seal (A) in position on top deck (B).
Using 7/16 inch socket, install 21 screws (C),
2.
washers (D), and seven straps (E).
3.
Place support (F) in position on top deck (B).
4.
Place small seal (G) on support (F).
5.
Using 7/16 inch socket, install 7 screws (H),
washers (J), and flat washers (K).
Go on to Sheet 3
TA140643
16-31
