TM 9-2350-222-20-1-5
TOP DECK FRAME ASSEMBLY REPLACEMENT (Sheet 5 of 9)
Top Deck Door Panels Replacement (Sheet 1 of 1)
TOOLS:
9/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Hinged socket wrench handle with 1/2 in. drive (breaker bar)
SUPPLIES: Lockwashers (MS35338-65) (12 required)
REFERENCE: TM 9-2350-222-10
PRELIMINARY PROCEDURE:
Traverse turret so gun tube is pointing to right or left side
(TM 9-2350-222-10)
NOTE
These door panels m a y b e
removed from top deck either with
top deck on or off vehicle.
NOTE
It may be necessary to use
breaker bar to remove screws.
REMOVAL:
1.
Using socket, remove four screws (A.),
lockwashers (B), and washers (C) securing
engine cover (D). Throw lockwashers (B) away.
Remove door (D).
2.
Repeat step 1 to remove engine door (E) and
engine door (F) from top deck (G).
3.
Remove aluminum access cover panel (H),
which is under three top deck panels (D), (E),
and (F).
INSTALLATION:
Position access cover panel (H).
1.
Install rear door (E), front door (F), and engine cover (D).
2.
Install 12 screws (A), new lockwashers (B), and washers (C). Using socket, tighten screws (A).
3.
End of Task
TA140637
