TM 9-2350-222-20-1-4
STEERING CONTROL LINKAGE ADJUSTMENT (Sheet 6 of 13)
14. Insert screws (E).
15. Remove locating pin (B).
16. Using 9/16 inch wrench, tighten screws (E).
LEFT SIDE OF TRANSMISSION
17. Using crow foot wrench adapter, and
torque wrench, tighten jamnuts (H) and
TOP OF TRANSMISSION
18. Using torque wrench with socket, tighten
screws (E) to 15-20 lb-ft (20-27 N-m)
Remove fixed fire extinguisher control valve (page 21-48).
19.
Remove fixed fire extinguisher cylinders (page 21-49).
20.
Insert locating pin (B).
21.
Attempt to insert locating pin (P).
22.
23.
If locating pin (P) can be inserted, go to step
35. If locating pin (P) cannot be inserted, go
on to step 24.
DRIVER'S STATION
24.
Remove locating pin (B).
LEFT FRONT
Go on to Sheet 7
Change 5 15-7
