TM 9-2350-222-20-1-4
PARKING BRAKE CABLE ADJUSTMENT (Sheet 4 of 4)
11. Place shift lever in P (park) position. Install
parking brake cable clevis (B) to parking brake
lever (C), using pin, washer, and new cotter pin
(A).
12. If clevis (B) will not aline with parking brake
lever (C), using 15/ 16 inch wrench, loosen two
nuts (M) and adjust cable until clevis (B) alines
with lever (C). Install pin, washer, and new
cotter pin (A).
13. Remove locating pin installed in step 4.
14. Install transmission shroud (page 9-23).
15. Unblock tracks (TM 9-2350-222-10).
End of Task
TA140331
13-23
