TM 9-2350-222-20-1-4
HYDRAULIC BRAKE SYSTEM BLEEDING (Sheet 3 of 4)
Using 11/16 inch wrench, open bleed cap or nut (J) and observe hydraulic fluid until air bubbles are no
7.
longer present. Close bleed nut (J).
Using 3/8 inch wrench, open bleed nut (K) on slave cylinder (L) until no air bubbles are observed in
8.
hydraulic fluid. Close bleed nut (K).
Repeat step 8 for opposite slave cylinder
9.
POWERPLANT REMOVED FOR CLARITY
Goon to Sheet 4
TA253415
13-14 Change 1
