TM 9-2350-222-20- 1-4
TRANSMISSION MAIN OIL FILTER ELEMENT REPLACEMENT (Sheet 1 of 7)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Cleaning and Inspection
Installation
Diagonal cutting pliers
TOOLS: 9/16 in. socket with 1/2 in. drive
Putty knife
7/16 in. socket with 1/2 in. drive
Slip joint pliers
5 in. extension with 1/2 in. drive
Retaining ring pliers
1 in. combination box and
open end wrench
Flat-tip screwdriver
Torque wrench with 1/2 in. drive
SUPPLIES: Transmission oil (Item 43, Appendix D)
Filter cover gasket
Rags (Item 65, Appendix D)
Dry cleaning solvent (Item 54, Appendix D)
Lockwire (Item 59, Appendix D)
1/4 in. x 20 NF x 3 in. long bolts (2 required)
Lockwashers (10 required'"
Goggles (Item 74, Appendix D)
Rubber gloves (Item 73, Appendix D)
Remove top deck (page 16-21)
PRELIMINARY PROCEDURES:
Remove transmission shroud (page 9-20)
REMOVAL:
NOTE
Some filter assemblies are secured with nuts and threaded
Using 9/16 inch socket with extension, remove 10 bolts (A) and lockwashers (B) holding filter
1.
assembly (C) to front of transmisison. Throw lockwasher away.
IChange 5 11-67