TM 9-2350-222-20-1-4
BATTERY JUMPER LEAD ASSEMBLY REPLACEMENT (Sheet 1 of 3)
TOOLS: 1/2 in. combination box and open end wrench
9/16 in. combination box and open end wrench
Lifter-scraper, battery terminal
Slip joint pliers
SUPPLIES: Grease (Item 36, Appendix D)
REFERENCE: TM 9-2350-222-10
Disconnect three battery ground straps (page 10-283)
PRELIMINARY PROCEDURE:
REMOVAL
1. Open turret platform access door (A).
2. Traverse turret to expose battery jumper lead
assembly (B) (TM 9-2350-222-10).
NOTE
Removal procedures for both ends
of lead assembly are identical.
3.
Slide boot (C) back on lead assembly (B).
Using 9/16 inch wrench, remove nut (D).
4.
Using 1/2 inch wrench, remove nut (E).
5.
Go on to Sheet 2
10-304
