TM 9-2350-222-20- 1-4
BATTERY TESTING AND REPLACEMENT (Sheet 11 of 13)
3.
Install holddown retainer (C) using four bolts
and eight washers.
Using 9/16 inch box wrench, tighten four bolts
(D).
NOTE
Apply light coat of grease (Item
36,
A p p e n d i x D)
to battery
terminals.
5.
Install six terminals (E) to battery posts (F).
NOTE
Do not force terminals onto
battery posts.
6.
Using 1/2 inch box wrench on nuts (G) and 1/2
inch open end wrench on bolts (H), tighten nuts
(G) and bolts (H) on six terminals (E) to battery
posts (F).
7.
Position six rubber boots (J) over terminals (E).
Go on to Sheet 12
10-299
