TM 9-2350-222-20-1-4
MASTER CONTROL PANEL REPAIR (Sheet 57 of 65)
Master Control Panel Wiring Harness Replacement (Sheet 1 of 5)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
Installation
TOOLS: 3/8 in. combination box and open end wrench
6 in. cross-tip screwdriver
3/8 in. socket with 1/2 in. drive
11/32 in. combination box and open end wrench
5/16 in. combination box and open end wrench
SUPPLIES: Silicone compound (Item 32, Appendix D)
Lockwasher (MS35338-43) (2 required)
Lockwasher (MS35338-42) (4 required)
PRELIMINARY PROCEDURE:
REMOVAL:
1.
Using screwdriver on screw (A) and 11/32 inch
wrench on nut (B), remove four screws (A),
2.
Remove connector (D) from panel and position
aside.
Go on to Sheet 2
TA139667
10-111