TM 9-2350-222-20-1-4
MASTER CONTROL PANEL REPAIR (Sheet 14 of 65)
Lighting Control Switch and Hi-Beam Indicator Light Replacement (Sheet 1 of 4)
PROCEDURE INDEX
PROCEDURE
PAGE
Removal
Installation
TOOLS: 4 in. flat-tip screwdriver
4 in. cross-tip screwdriver
10 in. adjustable wrench
1 in. combination box and open end wrench
SUPPLIES: Silicone compound (Item 32, Appendix D)
P r e f o r m e d packing (MS28775-119)
Lockwasher (MS35338-43) (4 required)
Lockwasher (MS35338-42) (3 required)
PRELIMINARY PROCEDURE:
REMOVAL:
1.
Using fingers, disconnect electrical connector
from base assembly (A) by pulling out.
NOTE
If
necessary,
use
adjustable
wrench to remove adapter.
2.
Using fingers, remove lens (B) and adapter (C)
by turning counterclockwise.
3.
Using fingers, remove preformed packing (D)
from adapter (C), Throw preformed packing (D)
away.
4.
Using fingers, remove lamp (E) by pushing in
and turning counterclockwise.
Goon to Sheet 2
TA139624
10-68