TM 9-2350-222-20-1-4
STARTER REPLACEMENT (Sheet 3 of 7)
Using 1/2 inch wrench, loosen two self-locking
6.
nuts (P) securing U-bolt (Q) to cradle assembly
(R). Throw self-locking nuts away.
Using 1/2 inch wrench, remove four screws (S)
7.
and lockwashers (T) securing relay solenoid
bracket to engine oil pan. Throw lockwashers
away.
8.
Using pliers, cut and remove lockwire (U) on
four screws (V) securing starter cradle
assembly (W) and bracket (X) to engine oil
pan.
9.
Using 9/16 inch socket and extension, loosen
and remove four screws and flat washers (V)
securing starter cradle assembly (W) and
bracket (X) to engine oil pan. Remove
starter cradle bracket and U-bolt as an
assembly.
Goon to Sheet 4
TA139583
10-28
