TM 9-2350-222-20-1-3
CAP ASSEMBLY REPLACEMENT (Sheet 2 of 3)
Using wrench to hold nut (E), use 1/2 inch
2.
socket and remove screw (F) securing
clamp (G). Discard nut (E).
Remove clamp (G) from cap assembly (H).
3.
Using 7/16 inch socket, remove screw (J)
4.
and lockwasher (K) securing cap assembly
(H). Discard lockwasher.
Using 1/2 inch socket, remove screw (L)
5.
and lockwasher (M) securing cap assembly
(H). Discard lockwasher.
Remove cap assembly (H) and gasket (N).
6.
Discard gasket.
Inspect bracket (P) for damage. If damaged and replacement is required, using 1/2
7.
inch socket, remove two assembled washer screws (Q) securing bracket and remove
bracket.
Go on to Sheet 3
TA249100
8-15
Change 2