TM 9-2350-222-20-1-3
EXHAUST PIPE (LEFT SIDE) REPLACEMENT (Sheet 2 of 4)
REMOVAL:
1.
Using flat-tip screwdriver, loosen screw (A)
holding clamp (B) onto tube (C).
2.
Using socket, remove six self-locking nuts (D) holding exhaust pipe (E) to turbosupercharger
housing (F). Throw self-locking nuts (D) away.
3.
Sliding exhaust pipe extension (G) out of tube (C), remove exhaust pipe (E) with insulation halves
(H) and gasket (J) from turbosupercharger housing (F). Throw gasket (J) away.
Using cross-tip screwdriver and wrench,
4.
remove 14 screws (K), each with two flat
washers (L), one lockwasher (M), and one nut
(N) holding insulation halves (H) to exhaust
Using flat-tip screwdriver, remove clamp (P)
5.
from packing (Q). Remove packing (Q) from
pipe (E).
6.
Remove insulation halves (H) from exhaust pipe (E).
Go on to Sheet 3
TA140460
8-6