TM9-2350-222-20-1-3
PERSONNEL HEATER FUEL LINE REPLACEMENT (EARLY MODEL) (Sheet 2 of 3)
REMOVAL:
1. Using 5/8 inch wrench, loosen fitting(A) from
tee (B). Move tube assembly (C) slightly away
from tee (B).
2. Using 7/16 inch wrench, remove screw and
lockwasher (D) securing clamp(E) to tube
assembly (C). Throw lockwasher away.
3. Remove clamp(E) from tube assembly(C).
NOTE
Use empty container to catch
any fuel draining from fuel pump.
4. Using 5/8 inch wrench, loosen fitting (F) from
elbow (G) on fuel pump.
5. Remove tube assembly (C).
INSPECTION:
Inspect inlet and outlet elbows for cracks, thread
damage, and burrs. Replace if necessary.
Go on to Sheet 3
TA253297
7-354.2 Change 1
