TM9-2350-222-20-1-3
PRIMER INLET FUEL TUBE ASSEMBLY (NIPPLE-TO-FILTER) REPLACEMENT (LATE MODEL)
(Sheet 3 of 3)
3.
Install two clamps (F) on tube (A).
4.
Using socket, secure four clamps (F) and (G)
with two screws and new lockwashers (H).
Using 1/2 inch wrench to hold nipple (C), use 9/16 inch wrench and tighten nut (D) onto nipple (C).
5.
6.
Using 1/2 inch wrench on hold adapter (B), use 9/16 inch wrench and tighten nut (E) onto adapter
(B).
End of Task
TA253248
7-352 Change 1
