TM9-2350-222-20-1-3
HULL PRIMER FUEL LINE TO ENGINE HOSE REPLACEMENT (LATE MODEL) (Sheet 1 of 1)
TOOLS:
9/16 in. combination box and open end wrench (2 required)
REFERENCE:
TM 9-2350-222-20-1
PRELIMINARY PROCEDURE:
Remove powerplant (page 5-1)
REMOVAL:
1.
Using two 9/16 inch wrenches, disconnect hose assembly (A) from tube assembly (B).
2.
Remove hose assembly (A) from hull.
INSTALLATION:
1.
Connect hose assembly (A) to tube assembly (B).
2.
Using two 9/16 inch wrenches, tighten hose assembly (A) to tube assembly (B).
3.
Install 2A powerplant (page 5-14) or 2D powerplant (page 5-37).
End of Task
TA253323
7-356 Change 1
