TM9-2350-222-20-1-3
PRIMER INLET FUEL TUBE ASSEMBLY (NIPPLE-TO-FILTER) REPLACEMENT (LATE MODEL)
(Sheet 1 of 3)
TOOLS:
Ratchet with 1/2 in. drive
7-/16 in. socket with 1/2 in. drive
1/2 in. combination box and open end wrench
9/16 in. combination box and open end wrench
SUPPLIES: Lockwasher (MS35338-44) (2 required)
REMOVAL:
1.
Using 1/2 inch wrench to hold adapter (A), use 9/16 inch wrench on nut (B) and remove nut (B) from
adapter (A).
2. Using 1/2 inch wrench to hold nipple (C), use 9/16 inch wrench on nut (D) and remove nut (D) from
nipple (C).
Go on to Sheet 2
TA253294
7-350 Change 1
