TM 9-2350-222-20-1-3
AIR CLEANER DOOR REPLACEMENT (TOP LOADING) (Sheet 3 of 3)
INSTALLATION:
1.
Lift door assembly (A) into place on air
cleaner housing (B).
2.
Using hammer, tap three straight pins (C)
into three hinges (D).
3*
Install three flat washers (E) onto three
straight pins (C).
4.
Using hammer, tap three new cotter pins
(F) into holes in straight pins (C).
5.
Using hammer, tap cotter pins (F) around
straight pins (C) to secure washers (E) and
pins (C) in place.
6.
Make sure door assembly (A) is in closed
position (lowered).
WARNING
To prevent screws from pulling out of
box and injuring personnel, a minimum of
200 pounds must be placed atop the
door before installing screws.
7.
Using wrench, install and t i g h t e n three
screws (G) to secure door assembly (A) to
air cleaner housing (B).
End of Task
TA249072
7-104.1/(7-104.2
blank)
