TM9-2350-222-20-1-3
FUEL RETURN LINES REPLACEMENT (2D ENGINE) (Sheet 2 of 10)
REMOVAL:
NOTE
Left and right side fuel return lines
are removed the same except for
fuel return lines (A) and (B) on
right side. For left side fuel return
lines removal, go to step 5,
skipping steps 1 through 4.
1.
Using 1/2 inch wrench, remove screw and
lockwasher (C) securing clamp (D). Throw
lockwasher away.
2.
Place drip pan under fuel filter (E).
3.
Using 9/16 inch wrench, disconnect fuel
return line (A) at fuel filter (E) and let fuel
drain.
4.
Using 9/16 inch wrench, remove fuel return
line (A).
6.
Remove clamp (D) from fuel return line (A).
Go on to Sheet 3
TA141499
7-23
