TM9-2350-222-20-1-3
FUEL RETURN LINES REPLACEMENT (2D ENGINE) (Sheet 1 of 10)
PROCEDURE INDEX
PAGE
PROCEDURE
I
Removal
Cleaning and Inspection
Installation
TOOLS: 1/2 in. socket with 1/2 in. drive
9/16 in. combination box and open end wrench
11/16 in. socket with 1/2 in. drive
7/8 in. combination box and open end wrench
1-1/8 in. open end wrench
5 in. extension with 1/2 in. drive
1/2 in. combination box and open end wrench
7/16 in. combination box and open end wrench
3/4 in. combination box and open end wrench
15/16 in. combination box and open end wrench
Flat-tip screwdriver
Drip pan
SPECIAL TOOLS: Ground hop kit (Item 30, Chapter 3, Section I)
SUPPLIES: Lockwasher
Washer (12 required)
Rags (Item 65, Appendix D)
PRELIMINARY PROCEDURES:
Remove engine access cover (left bank) (page 6-90)
WARNING
F u e l is very flammable and can explode
easily. To avoid serious injury or death, keep
f u e l away from open fire and keep fire
extinguisher within easy reach when working
with fuel. Do not work on fuel system when
engine is hot. Fuel can be ignited by hot
engine. When working with fuel, post signs
t h a t read "NO SMOKING WITHIN 50 FEET
OF VEHICLE."
Go on to Sheet 2
ALL data on pages 7-15 thru 7-21 deleted.
Change 4
(7-21 blank) /7-22