(1) Cab. (2) Cooling system. (3) Air filter compartment
tank. (5) Blade. (6) Back ripper. (7) Front idler. (8) Rear idler.
(9) Drive wheel.
(10) Hydraulic oil tank. (11) Oil filter compartment. (12) Recoil
cylinder. (13) Midroller.
(14) Electrical panel and BII compartment. (15) Tool/battery
compartment. (16) Optional arctic battery box. (17) Backup alarm.
(18) Winch. (19) Pintle hook.
NOTE: If the machine is equipped with the optional
arctic starting system, optional arctic battery box (16)
is mounted on the left fender of the machine, as
shown.
(20)
specifications
NOTE: 1 Actual machine height may vary due to suspension
system characteristics. Always confirm machine height
before the machine is shipped.
2Specification given is for five wraps of 5/8 inch cable.
3Cable strength is given for 5/8 inch cable.
4Drum capacity is five layers of 5/8 inch cable. Usable
length is 48 768 mm (160 ft).
NOTE: Refer to “Operation Section, Transportation
Information” in this manual for machine tie-down
locations and the military load classification (MLC)
number. Refer to “Maintenance Section, Lubricant
Viscosities and Refill Capacities” for information about
refill capacities.
20
14
15
17
18
16
19
10
11
12
13
1
3
4
5
6
7
8
9
2
Specifications and Model Views
14
General Section
Specifications and Model VIews
TM5-2430-200-10
DEUCE Operational Specifications
Standard Configuration
Overall Length:
5867 mm (231 in)
Overall Height 1:
2776 mm (109.3 in)
Overall Width:
2946 mm (116 in)
Special Shipping Width:
2591 mm (102 in)
Gross Vehicle Weight:
16 140 kg (35,500 lb)
Winch Capacity 2:
97 856 N (22,000 lb)
Maximum Cable Strength3:
195 725 N (44,000 lb)
Winch Drum Capacity 4:
55 169 mm (181 ft)
Towing Capacity (1st Gear):
15 910 kg (35,000 lb)
Maximum Fording Depth:
914 mm (36 in)
Top Speed:
48 kph (30 mph)
Engine Horsepower:
138/197 kW (185/265 hp)
Electrical System:
24 Volts
