You must first read and understand the warnings
and instructions contained in this manual before
performing any operation or maintenance
procedures.
Undercarriage
Cab Pins
Lubricate
Lubricate cab tilt pin fitting (1) on each side of the
machine.
NOTE: There are two cab tilt pin fittings.
Winch
Lubricate
Lubricate four fittings on the fairlead rollers of the
winch.
Lubricate the doubling block. There is one fitting.
NOTE: The doubling block is normally stored in the BII
box.
5
2
4
3
1
1
Every 250 Service Hours or 3 Months
127
Maintenance Section
Every 250 Service Hours or Monthly
TM5-2430-200-10