TM 5-2350-262-20-2
Change 3 4-894.11
A Remove cotter pin (1), clevis pin (2), and shift
control cable (3) from lever (4).
B Remove two nuts (5) from clamp (6) on cable
mount (7). Move shift control cable (3) away
from winch.
C Remove two screws (8), lockwashers (9),
washers (10), and shift control assembly (11)
from drivers compartment wall. Discard
lockwashers (9).
D Remove access cover (12) from shift control
assembly (16)
E Place shift control lever (13) in N (neutral), and
loosen jamnut (14) and setscrew (15).
F Turn shift control assembly (16)
counterclockwiseandremovefromshiftcontrol
cable (3).
REMOVAL