TM 9-2350-222-20-1-4
MECHANICAL TRACK ADJUSTING LINK REPLACEMENT (Sheet 5 of 5)
Aline tab of pin (C) with hole for screw (E).
9.
Insert screw (E) through new washer (F), tab of
pin (C), and shim (D).
Using 3/4 inch socket with ratchet, tighten
10.
screw (E).
Aline tab of pin (B) with hole for screw (G).
11.
Insert screw (G) through new washer (H) and
tab of pin (B).
Using 3/4 inch socket with ratchet, tighten
12.
screw (G).
Using 1-1/8 inch socket, install both washers (J)
13.
and nuts (K) onto pins (B) and (C).
Using pliers, install new cotter pins (L) through
14.
slots in nuts (K) and holes in pins (B) and (C).
15.
Install front fender (page 16-68).
16.
Connect track (TM 9-2350-222-10).
17.
Adjust track (TM 9-2350-222-10).
18.
TA249129
End of Task
Change 3
14-60