TM 9-2350-222 -20-1-4
BRAKE QUICK-DISCONNECT AND HOSE ASSEMBLY REPLACEMENT (Sheet 3 of 7)
8.
Using 11/16 inch wrench on nuts of tube
assemblies (H) and (J), disconnect nuts.
9.
Using 9/16 inch socket, remove screw (K) and
lockwasher (L).
NOTE
Replace screw (K) and lockwasher
(L) after step 10 finger tight to
hold adjusting screw lock plate.
Remove parts (C), (M), (N), and (P) as an
10.
assembly.
NOTE
It may be necessary to wiggle or
p u l l tube assemblies (H) or (J)
slightly to clear tee (M).
Insert plastic plug in nuts of both tube
11.
assemblies (H) and (J).
Using adjustable wrench to hold coupling half
12.
(C) and 11/16 inch wrench on nut of tee (M),
disconnect and remove tee (M) from bracket (N).
13.
Using adjustable wrench to hold coupling half
(C) and 7/8 inch wrench on nut (P), remove nut
(P) from coupling half (C) and bracket (N).
Go on to Sheet 4
TA140357
13-49