TM 9-2350-222-20-1-4
BRAKE SWITCH (STOPLIGHT) REPLACEMENT (Sheet 1 of 2)
TOOLS:
1 in. combination box and open end wrench
1-1/18 in, open end wrench
SUPPLIES:
Container (to catch brake fluid)
Silicone brake fluid (Item 34, Appendix D)
Silicone compound (Item 32, Appendix D)
REFERENCE:
TM 9-2350-222-10
PRELIMINARY PROCEDURES:
Place shift lever in N (neutral) position (TM 9-2350-222- 10)
Block tracks (TM 9-2350-222-10)
REMOVAL:
1.
Position container under brake switch (A) to catch brake fluid,
2.
Pull electrical connector (B) loose from switch (A).
NOTE
Have new brake switch ready to install immediately after
removal of old switch to prevent loss of too much brake fluid.
3.
Using 1 inch wrench, remove brake switch (A).
Go on to Sheet 2
TA253431
Change 1
13-45
