TM 9-2350-222-20-1-4
TRANSMISSION OIL BREATHER TUBE REPLACEMENT (Sheet 3 of 3)
INSTALLATION:
Manually start elbow (A) into transmission.
1.
Using 3/4 inch wrench, install elbow (A).
2.
Make sure hole in elbow (A) is pointing
toward nut (B).
Manually install elbow (C) into nut (D).
3.
4.
Using 7/8 inch wrench on nut (D) and 3/4
inch wrench on elbow (C), tighten nut (D).
Position tube (E) between elbow (A) and nut
5.
(B). If necessary, use 3/4 inch wrench to
aline elbow (A) with nut (F).
)
Manually start nut (F) onto elbow (A) and
6.
tighten with 7/8 inch wrench.
Manually start nut (B) onto elbow (C).
7.
Using 7/8 inch wrench, install coupling nut
8.
(B) onto elbow (C).
Start engine. Check for exhaust leaks at
9.
transmission oil breather tube (E)
connections.
Install transmission shroud (page 9-23).
10.
End of Task
11-84