SHIFTING CONTROL BULKHEAD LINK REPLACEMENT (Sheet 1 of 2)
TOOLS: 9/16 in. combination box and open end wrench
Slip joint pliers
Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237 N.m)
9/16 in. socket with 1/2 in. drive
SUPPLIES: Cotter pin (MS24665-283)
REFERENCE: TM 9-2350-222-20-1
PRELIMINARY PROCEDURE: Displace right ammunition rack (TM 9-2350-222-20-1)
Using pliers, remove cotter pin (A). Throw cotter pin away.
Using wrench, remove nut (B), washer (C), and washer (D).
Using wrench, remove two bolts (E).
Remove link (F) and washer (G).
Go on to Sheet 2
Change 1 6-7