TM 9-2350-222-20-1-5
VALVE BODY REPLACEMENT (FIXED FIRE EXTINGUISHER LINES) (Sheet 1 of 3)
TOOLS: 7/16 in. socket with 1/2 in. drive
1-1/16 in. open end wrenches (2 required)
12 in. adjustable wrench
10 in. pipe wrenches (2 required)
Vise
Torque wrench with 1/2 in. drive (0-175 lb-ft) (0-237
10 in. extension with 1/2 in. drive
1-1/16 in. crowfoot with 3/8 in. drive
Adapter, 1/2 in. to 3/8 in.
PRELIMINARY PROCEDURES: Remove fire extinguisher cylinders (page 21-49)
Remove flexible hose assembly 2nd shot cylinder
Remove flexible hose assembly 2nd shot cylinder
REMOVAL:
1.
Using adjustable wrench, remove connector (A) from elbow (B).
2.
Using socket, remove two screws (C) and washers (D) from valve body (E).
3.
Remove body (E) from vehicle.
Go on to Sheet 2
Change 4