TM 9-2350-222-20-1-5
TUBE ASSEMBLY 1ST SHOT CYLINDER LINEREPLACEMENT (Sheet 3 of 3)
4.
Position assembled line (G1) in vehicle.
NOTE
Be sure elbow on hose is positioned as
shown when connector (H) is tightened.
5.
Using 1-1/4 inch wrench, install connector (H)
on tube (G) onto adapter(J). Using torque
wrench and 1-1/4 inch crowfoot, tighten to
40-55 lb-ft (54-75
6.
Install 1st shot freed fire extinguisher cylinder
End of Task
Change 4