DRIVER'S SEAT SUPPORT AND HOUSING ASSEMBLY REPAIR (Sheet 2 of 7)
Pull dumping handle before removing retaining plate to relieve
pressure on spring.
Using screwdriver, remove four screws (A) and lockwashers (B) from retaining plate (C) at base of
Remove retaining plate (C).
Using fingers, remove two retainers (E), springs (F), and guides (G) from support (D).
Using slip joint pliers, remove four clips (H)
from ends of two shafts (J) in adjusting
Remove two shafts (J) and four rollers (L) from
adjusting assembly (K).
Go on to Sheet 3