FENDER AND SHIELD (REAR) REPLACEMENT (Sheet 3 of 7)
Using 1-1/8 inch socket, remove four screws (U) and lockwashers (W) holding outrigger No. 5 (J) to
vehicle. Remove outrigger No. 5 (J). Throw lockwashers away.
Using 9/16 inch socket on screw (X) and 9/16 inch wrench on nut (Y), remove three screws (X), six
flat washers (Z), and self locking nuts (Y) holding shield (S) to fender (E). Remove shield (S) from
fender (E). Throw self locking nuts away.
Go on to Sheet 4