BRAKE MASTER CYLINDER REPLACEMENT (Sheet 4 of 5)
Replacement master cylinders are
s u p p l i e d with plugs in the four
ports. Using screwdriver, remove
two plastic plugs.
inch wrench, remove pipe plug.
Install three plugs in old master
cylinder and turn in to support
Using 3/8 inch wrench, make sure bleeder
valve (A) is tight.
V i s u a l l y inspect to make sure
there is a gasket under plug (B).
Using 3/4 inch wrench, make sure plug (B)
Using pipe wrench, install elbow (C) facing as
Place new gasket on each reducer (D) and (E).
Using 13/16 inch wrench, install reducers (D)
GO on to Sheet 5