DOMELIGHT RESISTOR ASSEMBLY REPLACEMENT (Sheet 1 of 2)
3 in. extension with 1/2 in. drive
7/16 in. socket with 1/2 in. drive
9/16 in. combination box and open end wrench
Hose clamp pliers
3/32 in. socket head screw key (allen wrench
SUPPLIES: Lockwasher (MS35338-33)
REFERENCE: TM 9-2350-222-10
Disconnect electrical connectors (A) and (B).
Using allen wrench, loosen two setscrews (C).
Slide knob (D) off shaft of resistor assembly (E).
Using wrench on nut (F) and pliers on
resistor assembly (E), remove nut (F) and
lockwasher (G). Throw lockwasher away.
Using socket, remove screw (H), lockwasher (J),
washer (K), and clamp (L). Throw lockwasher
Open clamp (L) to release resistor assembly
Remove resistor assembly (E).
Go on to Sheet 2