TM 9-2350-222-20-1-3
MANIFOLD HEATER IGNITION COIL AND CABLE REPLACEMENT (2D ENGINE)
(Sheet 1 of 3)
TOOLS: 7/8 in. combination box and open end wrench
3/4 in. combination box and open end wrench
1/2 in. combination box and open end wrench
1/2 in. socket with 1/2 in. drive
5 in. extension with 1/2 in. drive
Spanner wrench
7/16 in. socket with 1/2 in. drive
REFERENCE: TM 9-2350-222-10
PRELIMINARY
PROCEDURE:
WARNING
Remove rings, bracelets, wristwatches,
and neck chains before working around
the tank or other vehicles. Jewelry can
catch on equipment and cause injury, or
may short across an electrical circuit and
cause severe burns or electrical shock.
NOTE
Replacement instructions are the same for both sides.
Therefore, only the left side is shown.
Go on to Sheet 2
All data on pages 7-391 thru 7-393 deleted.
(7-393 blank) /7-394
Change 4