TM 9-2360-222-20-1-3
MANIFOLD HEATER (LEFT AND RIGHT BANK) FUEL RETURN TUBE ASSEMBLY
REPLACEMENT
(Sheet 3 of 7)
Using socket and 1/2 inch wrench, remove four
screws and washers (D) from lower engine
cooling fan shroud (E).
4.
Using screwdriver, remove two screws and
washers (F) from lower engine cooling fan
shroud (E). (Left screw is hidden. You will
have to feel for it.)
NOTE
Engine cooling fan shroud (E) must
be slightly displaced in step 5 t o
a l l o w clearance for removal of
manifold heater return tube (C).
5.
Using hammer handle, tap on bottom of engine
cooling fan shroud (E). Second person, using
screwdriver, pry up on front lip of cooling fan
shroud and slightly displace it.
6.
Using fingers, remove grommet (G) from tube
assembly (C).
7.
Using 9/16 inch wrench, remove line nut of
tube assembly (C) from elbow (H) on manifold
heater (J).
Go on to Sheet 4
TA141563
7-383