MANIFOLD HEATER FUEL RETURN SOLENOID VALVE REPLACEMENT (Sheet 5 of 5)
Place solenoid valve (D) with fittings on
bracket. Position solenoid valve so electrical
connector is facing rearward.
Using 5/16 inch wrench, install two screws
and washers (F) to secure solenoid valve (D)
Connect hose assembly (G) to elbow (H). Using 9/16 inch wrench, tighten hose assembly (G) to
Connect two fuel lines (J) to tee (K). Using 9/16 inch wrench, tighten fuel lines (J) to tee (K).
Using spanner wrench, install electrical connector (L) to valve.
Operate primer pump (TM 9-2350-222-10). Check for leaks. If leaks are found, correct as
End of Task