TM 9-2360-222-20-1-3
MANIFOLD HEATER (LEFT AND RIGHT BANK) FUEL RETURN TUBE ASSEMBLY
REPLACEMENT
(Sheet 5 of 7)
INSTALLATION:
NOTE
C o a t pipe thread fittings with
compound (Item 27,
sealing
Appendix D) before installation.
Using both hands, carefully push tube assembly
1.
(A) down through lower engine cooling shroud
opening (B).
Using 9/16 inch wrench, install line nut of tube
2.
assembly (A) on elbow (C) at manifold heater
(D).
Install grommet (E) on tube assembly (A) with
3.
flat side of grommet facing toward front of
engine.
Go on to Sheet 6
TA141565
7-385