POWER PLANT RIGHT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT
(2D ENGINE) (Sheet 3 of 9)
Using 9/16 inch socket, remove five capscrews
(G) and self-locking nuts. Use 9/16 inch wrench
to keep nuts from turning, Throw self-locking
Using 1/2 inch socket, remove three screws (H)
and cushioned clamp holding timing access
cover to support frame.
Using 9/16 inch socket, remove capscrew (J)
and self-locking nut. Use 9/16 inch wrench to
keep nut from turning, Throw self-locking nut
Using 1/2 inch socket with extension , or 1/2
inch wrench, remove five screws (K).
Go on to Sheet 4