POWERPLANT RIGHT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT
(2D ENGINE) (Sheet 6 of 9)
Five of the six cooler frame upper brackets are identical and
are mounted the same way. The sixth bracket (C) is located
closest to the engine flywheel end and requires shims and an
additional screw and self-locking nut for proper installation.
3. Using 9/16 inch socket with extension, install six
shims (C). Hold screw head below shims with
9/16 inch wrench to keep screw from turning.
Using 1/2 inch socket with extension, install six
It may be necessary to depress three flanges (E) on frame
bottom during installation to clear protruding obstacles on the
Go on to Sheet 7