TM 9-2350-222-20-1-4
3TEERING LEVER ASSEMBLY REPAIR (Sheet 4 of 5)
3. Install new washer (D) on lower link and pin
assembly (E) and insert in support (C).
4. Position rear connecting rod (F) to lower
link and pin assembly (E) and secure with
bolt (G).
5.
Install new washer (H), .010 shim (J), and new
upper link (K) on pin (L) of link and pin
assembly (E).
Aline scribe marks on pin (L) and link (K).
6.
Be sure link and pin assembly (E) and washer
(D) are flush with support (C). Weld link (K)
to pin (L).
Remove and discard shim (J).
7.
Go on to Sheet 5
15-24.4 Change 5