TM 9-2350-222-20-1-4
PARKING BRAKE CONTROL ASSEMBLY REPLACEMENT (ENGINE MOUNTED
(Sheet 3 of 7)
5.
Using 9/16 inch wrench on nut (Q) and adjustable wrench, remove connector (J) and nut (Q).
6.
Use an adjustable wrench to hold support bracket(N). Using a 15/16 inch wrench, remove nut (R) and
preformed packing (S), Throw preformed packing away.
7.
Using a 15/16 inch wrench, remove nut (T) and lockwasher (U) from control assembly (C). Remove
support bracket (N) and lockwasher (V). Throw lockwashers away.
8.
Using a 15/16 inch wrench, remove nut (W) from control assembly (C).
Goon to Sheet 4
TA253452
Change 1 13-98.3