PARKING BRAKE BELLCRANK REPAIR AND REPLACEMENT (Sheet 1 of 4)
Cleaning and Inspection
TOOLS: 9/16 in. socket with 1/2 in. drive
9/16 in. combination box and open end wrench
Long round nose pliers (needle nose)
12 oz. hammer
SUPPLIES: Cotter pin (3 required)
Dry cleaning solvent (Item 54, Appendix D)
Rags (Item 65, Appendix D)
REFERENCE: TM 9-2350-222-10
PRELIMINARY PROCEDURES: Block tracks (TM 9-2350-222-10)
Place transmission in neutral (TM 9-2350-222-10)
Remove transmission shroud (page 9-20)
Using pliers, remove cotter pin (A) and
flat washer (B) from pin (C). Throw
cotter pin away.
Using socket, remove two screws (D).
Remove pin (C) and cable (E) from bellcrank (F).
Go on to Sheet 2
Change 5 13-99