TM 9-2350-222-20-1-4
BRAKE MASTER CYLINDER REPLACEMENT (Sheet 4 of 5)
NOTE
Replacement master cylinders are
s u p p l i e d with plugs in the four
ports. Using screwdriver, remove
two plastic plugs.
Using 9/32
inch wrench, remove pipe plug.
Install three plugs in old master
cylinder and turn in to support
maintenance.
1.
Using 3/8 inch wrench, make sure bleeder
valve (A) is tight.
NOTE
V i s u a l l y inspect to make sure
there is a gasket under plug (B).
2.
Using 3/4 inch wrench, make sure plug (B)
tight.
3.
Using pipe wrench, install elbow (C) facing as
shown.
4.
Place new gasket on each reducer (D) and (E).
5.
Using 13/16 inch wrench, install reducers (D)
and (E).
GO on to Sheet 5
TA140351
13-43