TM 9-2350-222-20-1-4
HEADLIGHT TUBE ASSEMBLY REPLACEMENT {Sheet 1 of 1)
7/16 in. combination box and open end wrench
TOOLS:
SUPPLIES:
Gasket (7970024)
Lockwasher (MS35338-44) (3 required)
PRELIMINARY PROCEDURES:
REMOVAL:
1.
Using wrench, remove three screws (A), lock-
washers (B), and flat washers (C). Throw
2.
Remove tube assembly (D) and gasket (E). Throw
gasket away.
INSTALLATION:
1.
Position new gasket (E) and tube assembly (D) onto vehicle.
2.
Using wrench, install and tighten three screws (A), new lockwaahers (B), and flatwasahers (C) to
secure tube assembly (D).
3.
4.
End of Task
TA253338
Change 1 10-250 .1/10-250.2 (blank)