TM 9-2350-222-20-1-4
ENGINE OIL TEMPERATURE TRANSMITTER REPLACEMENT (2D ENGINE) (Sheet 2 of 3)
REMOVAL:
1.
place rags under trasmitter:
2.
Using 1/2 inch wrench, remove self-locking nut
and clamp (A). Throw self-locking nut away.
3.
pull socket of rubber insulated connector (B)
from switch cap (C).
(D) from engine.
5.
Check interior and protruding part of
transmitter socket (E) for cracks and crossed
threads. Replace if necessary.
INSTALLATION:
1.
Lightly coat threads of transmitter with sealing compound (Item 20, Appendix D).
Go on to Sheet 3
TA139811
10-260