TM 9-2350-222-20- 1-4
TAILLIGHT GROMMET REPLACEMENT (Sheet 1 of 1)
TOOLS: Flat-tip screwdriver
Hand hacksaw
SUPPLIES: Silicone compound (Item 32, Appendix D)
Grommet (10905012)
Sandpaper (Item 51, Appendix D)
PRELIMINARY PROCEDURES: Remove transmission shroud (page 9-19)
(Right) or 10-229 (Left)
REMOVAL:
1.
using hacksaw, cut inside end from grommet.
2.
Using screwdriver, pry out grommet and throw
grommet away.
Using sandpaper (Item 51, Appendix D), clean out grommet cavity.
3.
INSTALLATION:
1.
Apply silicone compound (Item 32, Appendix D)
to new grommet.
2.
Install new grommet by pushing in until seated.
3.
or 10-231 (Left).
4.
Install transmission shroud (page 9-23).
End of Task
10-235